This work covers a broad analysis of the risks that could impact the achievement of electrical safety of electrical installations. The work includes both electrical equipment such as the installation of electrical equipment.The report illustrates the main technical characteristics of electrical connections greater than 10 mm2 and provides an introduction to the crimping systems for copper and aluminum conductors. In addition to that analyzes the factors that are important to assure the quality of an electrical connection throughout the value stream in terms of both materials such informations. Furthermore analyzed deeper the need for skills development of technicians and other staff.The different parts of this work are analyzed and presented, in theory to studies carried out both at Elpress AB and partly with the help of other scientific reports dealing with similar subjects. In addition, presents a survey that will help understanding the current perception of the electrical connections and cable crimping systems among end users.

SUMMARYEnvironmental issues are currently a hot topic of debate. Studies within the optics branch have not specifically been conducted previously, so the aim of this study was to determine the extent of environmental-awareness specifically within this branch.A survey, consisting of questions relating to environmental issues, was distributed to 100 randomly-selected opticians in Sweden. Of these 100 surveys, 64 were returned and showed a varied branch-engagement for environmental issues.Results of this survey showed that opticians were best in sorting newspapers, magazines, other paper and hazardous waste. Metal and rigid plastic were not sorted to any larger extent.Choosing environmentally-safe products was not so popular and only six stores always do this. 25 shops turn off electrical machines and equipment over night; while the majority of the remaining stores leave the machines on during the night.27 stores did not know if their electrical company provided ?green electricity?.Results showed that there is a lot of work to be done in making the stores more environmentally friendly.

To meet the growing amount of waste from electronic and electrical equipment (WEEE) EU developed, year 2002, a directive (2002/96/EG) with the objective to govern the management and reduce the amount of WEEE. The directive is based on producer responsibility which makes the producer responsible for collection and dispose of WEEE. In 2012 a new revised directive (2012/19/EU), with tougher collection targets, was developed. Both the old and the new directive states that the approach to tackle WEEE should be prioritized in order of prevention, reuse and then recycling. Hitherto the amounts of WEEE has increased every year, making it relevant to examine which type of preventive measures the directive contains and how effective they are.

This thesis for the Master of Science degree was performed at Oppunda Electronics AB. The assignment was to further develop an existing prototype of a dispensing equipment. The dispensing equipment doses a kind of glue, bonding which dentist use to mend teeth. The dispensing equipment is adjusted to dose 12 micro litres of bonding. With the dispensing equipment SafeBond Electronic the user can reduce the bonding consumption with approximately 50 percent.

Economy and environment has for a long time been studied separately and seen as incompatible. With a growing society and increasing pressure on environmental issues the need of a new economy with the environment included is necessary. This study examine if European Union´s picture of the waste hierarchy match the reality. Since the purpose with the waste hierarchy is to benefit environmental and economy. A survey was made over Käppalaförbundets waste from 2013, to see where the waste falls in the waste hierarchy.

The RoHS Directive was introduced in order to restrict hazardous substances in Electrical and Electronic Equipment, EEE. It currently restricts the use of six hazardous substances/compounds; cadmium, lead, mercury, hexavalent chromium, PBB, and PBDE. The RoHS Directive currently includes category 1-7 and 10 in the categories of EEE listed in Annex 1A to the WEEE-Directive (Waste of EEE). The aim with the report is to investigate and elucidate prospects and obstacles to increase the scope of RoHS. This report mainly considers the inclusion of product categories 8 (Medical Devices) and 9 (Monitoring and Control Instruments).

Background: The demand for sending letters, in the traditional aspect, has decreased because of electronic sources which have replaced a big part of letter communication. The Postal Service constantly strives for lowering costs and due to the changeable demand, a greater awareness is required regarding recourses and their usage. The previously mentioned measures in combination with commonly occurring quality issues during the collective process at the letter terminal in Alvesta would be improved by applying a lean-perspective to the process. A first step towards saving of time is to apply the ?value stream mapping?-method on the collective process for small and large letters.Purpose: To map the process of collection for small and large letters to be able to identify waste of recourses and furthermore give suggestions on how the Postal Service would be able to reduce the waste of recourses identified.

The smelting process at Sapa Profiler AB in Sjunnen generates large quantities of waste heat which is absorbed by the cooling water when the aluminum is cooled down. This paper is the result of a Master?s Degree Project aiming to present the conditions for recycling the waste heat. The cooling water absorbs the heat from the aluminum at an average rate of 600 kW and the paper shows that it can be used to replace electrical power consumption for heating the production plant?s facilities.

Trioplanex International AB is a part of the group Trioplast Industrier AB, which produces packaging materials for the film and hygiene industry. The group is active throughout Europe, where most of the production is located in Sweden, with head office in Smålandsstenar. Operations in Landskrona consist of Trioplanex International AB and Trioplast Landskrona.Semi-finished articles consisting of paper cores, so called bobbins, give rise to a high amount of core waste in any form of core cutting. The objective of the report is to map out all core waste and illustrate the material flow with regard to present layout and equipment.In the beginning of the project an analysis of the current process was carried out with focus on the cutting equipment. A case study in the form of an improvement work took place in order to reduce the causes which had the biggest impact on existing machinery.Improvement proposals were discussed by the author together with supervisor, assigner and other parties involved.

This paper deals with challenges associated with handling scrubber waste in the port of Karlshamn and what various industry partners are doing to meet this growing demand. The main challenges have been the proportion of ships with scrubber, the amount of generated waste and waste characterisation. An understanding of these factors has been crucial in order to ascertain the aim of this study, which has been made with calculations based on leading manufacturer?s scrubber analyses and with an estimation of the quantity of ships with scrubber by examining AIS data from the Port of Karlshamn. In order to calculate the quantity of scrubber waste two different scenarios were established, which in turn produced two different outcomes.

The ?civilized? world is in need of fossil fuel in order to function. Hybricon AB is a company in Umeå that is developing a technology that hopefully can reduce parts of this need. They are currently testing their two electrical busses (with Hybrid backup) in city traffic on the roads of Umeå in cooperation with the county of Umeå.                               The busses are originally diesel-busses, but the diesel motor has been replaced with two electrical hub-motors with a power of 145 kW each that are powered by batteries.The batteries are charged at the end station after each route. In case the batteries should run low on capacity during driving, they can be recharged by the so called genset.

The research in this paper aims to producing a home version machine thatcan dry and make biological waste into compact pellets. This product ismade primarily for those who want to improve the environment and reducethe energy consuming process of separating the biological leftovers fromother waste in the large processing plants and save money due to reducedpickups of waste. Since there is no commercially available product thatdoes what we want to achieve we had to start from the beginning with boththe design and the mechanical aspects. The result is a machine, that fits inour homes, and in an easy and inexpensive way reduces the amount ofbiological waste that needs to be collected by the public wastetransportation system. This is done without reducing any of the energy inthe waste and it can still be used to compost or by large-scale plants that usethe waste to make electricity.

This thesis is a feasibility study into how Fresenius Kabi may rationalize their destruction process in regards to cost, recycling, and work environment. The two main objectives are to identify scrap flows and the possibility to improve or replace the equipment that is now carrying out the physical scrapping. The flow has been visualized by a flow chart of the material and communication. A chart of the problem established to visualize where improvements are necessary. Based on the problems proposals are presented on how to improve the flow thru the plant.During analyze of the physical scrapping equipment it was also necessary to take a deeper look at how they are carrying out there work today, how does the procedure look like, working environment and where are the weaknesses.

This thesis is   focused on identifying and documenting all   electrical equipment, such as devices, power lines / cables, and connectors in the facility and also on presenting a brief   technical description and information of the systems around the reactors.   Furthermore there will be a brief description of LabVIEW - which is a   graphical programming language- and which devices / elements   are programmed. For further notification, I am not   responsible for the programming of the devices in LabVIEW   which I have only used as a tool in my work. The plant   for production of biogas consists of four reactors   of which the third reactor (Lakbädden)   is connected to another reactor (UASB)   where they cooperate with each other.   The reactors are used for producing   biogas in the form of methane gas.The reactors I and II are   connected to, various electrical devices as, flow meters, temperature   sensors, frequency converter and   more.

This study aims to evaluate the waste management in Norrbottens municipalities in key areas such as possibilities to reach the two national waste goals, information to the public, the effect of legislation, future of waste management and differences in geographic- and demographic areas. The Waste Framework Directive (WFD) issued by the EU and incorporated into Swedish law plays a major part in waste management by defining a hierarchy in five steps how waste should be treated. Interviews conducted with each of the fourteen municipalities aimed to find out what step in the hierarchy they are at and what effect the implementation of EU-legislature into Swedish law has had. Based on the interviews a diverse range of answers was found in relation to the questions asked, generally the more populated municipalities saw a more positive future of waste management, mainly because more developed infrastructure to handle waste is already in place. However the smaller the municipality is the harder it is to allocate resources for waste management and problems arise in the form of expensive transports of waste.